How to install XNet Mod An Efficient and Scalable Networking of minecraft [1.12.2-1.11.2] Mods for Minecraft?
1. Create a Backup File: Before doing anything, create a backup of your Minecraft world by opening File Explorer, typing %appdata%, and pressing Enter. Then go to /Roaming/.Minecraft /saves.
Copy them to a folder, and if something is wrong, all you will have to do is copy them back to the root folder.
2. You must have Minecraft Forge installed, you can read the instructions below the article.
3. Download, install SPKey1 packages: Searching for mods can be very complicated. File downloaded in .Jar format safe for your computer. Some mods may be outdated and won’t work, while some are incompatible with others. If you only download mods for Forge, you will avoid most of these problems.
4. Copy files in the mod directory:
- Press the Windows key +R at the same time
- Type %appdata% and press enter
- Find folder Minecraft and then look for the Mods folder within that
- Click on the desktop and then press Command+Shift+G all at the same time
- Type ~/Library and press enter
- Open the folder Application Support and then Minecraft.
Here, copy and paste the downloaded mod (.jar or .zip) that you want to add.
5. Run Minecraft and enjoy the mods: Now is the time to play the game. Note that each mod has a different way of controlling and interface. You read the instructions that accompany them (usually the original website of the mod or the text files).
Minecraft mods were once installed manually. You must open the original game file (named minecraft.jar), copy the mod, and delete a META-INF folder. Unfortunately, this is not allowed in the latest version of Minecraft. Minecraft Forge is an accessory added to Minecraft, making it possible to create and install any type of mod. It is updated regularly, and you will not need to modify the original file.
, If there is an error, please comment on this article we will support
Where is the best place to download Minecraft mods?
If you are looking for even more mods, here are some sites with instant updates of the best Minecraft Mods available for download. No website is official, but they are reliable and safe to load.
XNet Mod An Efficient and Scalable Networking of minecraft [1.12.2-1.11.2] compatible with minecraft versions:1.10.2, 1.9.4, 1.8, 1.7.10, 1.7.2, 1.6.4, 1.5.2 – Latest minecraft version: 1.17, 1.16.5, 1.16.4, 1.16.3, 1.16.2, 1.16.1, 1.16, 1.15.2, 1.15.1, 1.15.2
XNet Mod An Efficient and Scalable Networking of minecraft
XNet Mod 1.12.2/1.11.2 adds a single type of cable: a networking cable. Using networking cables you can instantly transport items, fluids, energy, and information. The main focus of this mod is efficiency and flexibility. Efficiency in that it is possible to make huge cable networks (tested with two chests seperated by a cable of 12000 blocks long) with no lag. The cables themselves are not even tile entities. Flexibility in that the controller allows for really flexible configuration for distributing information.
XNet is an item, fluid, energy, and information transportation mod that is all about efficiency. The cable system is designed in such way that you should be able to make huge cable systems without any overhead. Cables (for example) are not tile entities and have very simply models. This makes transporting items accross a cable of 12000 blocks long just as efficient as doing it on a 5 block long cable.
At the core of this mod is a network. A network is basically a single section of connected cables connected (via connectors) to various blocks (chests, machines, ¦) and one controller. The controller is the block that does the actual work for that network.
Every network can have 8 channels maximum. Every channel has a type (energy, item, fluid, logic, ¦) that you can configure in the controller. Depending on the type of a channel and the machines that are connected to that channel various things can happen.
You use connectors to connect machines to your network. Through that connector various channels (even with different types) can do their thing. Normal connectors only allow access through the side from which you are placing the connector. i.e. for a vanilla furnace that would mean that with a normal connector you can only get the melted result by placing a connector at the bottom of the furnace. Using advanced connectors you can overcome that limitation and access the down side of a furnace from any other side. Advanced connectors have other advantages. They allow higher speeds for item and fluid transfer (10 ticks minimum per operation as opposed to 20) and can store more RF (which means they can also transfer more RF).
One warning: an advanced energy connector can still not extract energy from another side. The reason for this is that it is actually the generator/producer itself that pushes energy and it will not do that through that other side. Insertion of energy to another side does work however.
Cables and Colors
Cables (and connectors) can have four different colors. These are used to be able to distinguish multiple distinct networks adjacent to each others (to prevent the cables from connecting). A controller will adapt its color to the first colored cable it can find around it and then remember that (unless that color is totally removed).
The logic channel is special. First one has to know that every network has seven colors (don’t confuse these with cable colors) which is either enabled or disabled. By default all colors are disabled. Every connector (in the controller GUI) can be configured to be active only when a number (up to four) colors are active. Using a logic channel and sensors you can (based on various conditions) enable colors. For example, you can have one sensor detecting how much RF is left in a machine. And if that number goes below 1000 enable red’. Then another sensor can detect if there is enough coal in a chest and if true enable green’. Then you can have an item channel transporting coal to a coal generator but only when both red’ and green’ are enabled. So that means: only enable the coal generator is power is low and there is enough coal. Sensors themselves can also be enabled/disabled based on colors.
If you want to go beyond the 8 channel limit or you want to connect multiple distinct networks you can make a routing network’ using routers. A single router is already sufficient to connect up to six (six sides of the router) channels but using routing cables and routing connectors you can also make a routing network out of routers. Note that on a single routing network you can only have 32 published channels.
Inside the GUI of the controller you can give a channel a name. This name isn’t used anywhere except with the router that is directly attached to this network though a connector. Only channels that have a name will be visible locally in the routing GUI.
Every named channel can be published on a routing network (or with a router). This has to be done in the routing GUI by giving it a published name. The published name is the name with which that channel will be known on the routing network. Note that types are also considered. You have a a published channel called foo’ for items and another published channel called foo’ for fluids on the same network but they will not interact and only count as one channel for the channel limit.
Item and Fluid Transfer
One thing to note is that item and fluid transfer is always immediate. There are never items or fluids inside’ the network. If there is no room for items or fluids to go too in a network then they will not leave their destination.
Power transfer works differently. Since RF and Forge Energy are push’ systems (i.e. a powercell or generator pushes energy to adjacent machines) the connector needs to have an internal RF storage. The advanced connector can store more then the normal connector which means it can also transfer more. When you have an energy channel distributing energy to various machines then the power first has to go to the connector (pushed by the generator) and then it can be transfered to all machines that need it.
The controller needs power to do this. There are basically three power consumption areas:
- Constant powerdrain: this is by default set to 0
- Constant powerdrain per active channel: this is by default set to 1
- Powerdrain per operation: this is by default set to 2
How to install:
- Make sure you have already installed Minecraft Forge
- Locate the minecraft application folder.
- On windows open Run from the start menu, type %appdata% and click Run.
- On mac open finder, hold down ALT and click Go then Library in the top menu bar. Open the folder Application Support and look for Minecraft.
- Place the mod you have just downloaded (.jar file) into the Mods folder.
- When you launch Minecraft and click the mods button you should now see the mod is installed.
XNet Mod 1.12.2/1.11.2 Download Links:
For Minecraft 1.11.2
Link Download : https://dl6.mmosharing.com/index.php?act=dl&id=1521088078
For Minecraft 1.12.1/1.12
Link Download : https://dl5.mmosharing.com/index.php?act=dl&id=1521088101
For Minecraft 1.12.2
Link Download : https://dl5.mmosharing.com/index.php?act=dl&id=1521088107
How To Install Minecraft Forge (Modding API)?
Step 1: Download Minecraft Forge here.
Step 2: run the downloaded file.
Step 3: Click ok to install (Requires computer to install Java).
Step 4: Wait for the system to install Minecraft Forge.
Step 5: After successful installation, you will receive a notification.
Step 6: Open Run By keyboard shortcuts (Windows+R), type% appdate% to open .minecraft folder
Step 7: Create a new folder and name it Mods. If not, create a folder called Mods.
Step 8: Run with forge,You will see Minecraft Forge in the lower-left corner and the Mods button under Multiplayer.
Above are the steps for you to download and install Minecraft Forge; this is the required software for you to use the mods in Minecraft to help your game experience increase a lot.
If you have any questions about XNet Mod An Efficient and Scalable Networking of minecraft [1.12.2-1.11.2], please comment below the article, we will support